Is this really reality

PROFINET Certified Network Engineer and Installer Course (PN-CNE-I) – Johnson City

213

Price: $2495.00

Date: September 24, 2018

Our certification classes are intense, hands-on courses which will show you where and how to find and use technology-related information. You need to learn how the underlying technology works from the application to the frame level and pass both a practical and written exam to become certified. You will receive 24 PDH hours and two Certificates (PROFINET engineer, installer) from PROFINET International (PI) for completing the course.

CLASS SYLLABUS

Ethernet Basics

  • Introduction to Ethernet, TCP, UDP, IT protocols *

Network Installation and Infrastructure

  • Topologies *
    • SNMP *
  • Building and testing an Industrial Ethernet cable *
    • Installation guidelines and best practices
      • Laying cables
      • Grounding
      • Power system
  • Network Load calculation and rules *
  • Commissioning checklist

PROFINET Overview

  • Technology and Organization

PROFINET performance levels

  • Conformance classes

PROFINET IO

  • PLC Configuration (RT, IRT) *
  • Ethernet and protocol frames *
  • Performance calculations for IRT *
  • Diagnostics *, troubleshooting
    • Records *, alarms *, error codes *

Wireshark Capture and Analysis

  • Ethernet capture guide (port mirror, TAPs, capture tools)
  • Ethernet monitor, setup *
  • PROFNET Startup Sequence *, Alarms *, Records *, troubleshooting *

Profinet Commander

  • IO Controller *
  • Name assignment *
  • Factory reset *
  • Identification and Maintenance *
  • Data record objects *

PROFINET GSDML *

  • Device description files
  • Vendor and Device ID
  • GSD module & submodule identification
  • File structure and parameters
  • GSD Check

Additional Topics

  • Simple Device Replacement *
  • Fast Start Up
  • Shared Device
  • I-Device
  • Redundancy
  • Network Security
  • Isochronous mode application
  • Application profiles overview
    • PROFIsafe, PROFIenergy, PROFIdrive
  • Technology comparisons

* denotes a section which also includes a hands-on lab

Download the Class Agenda

Address:
211 Mockingbird Lane
Johnson City, TN
37604
USA Map and Directions

Available Spaces: 6

PROFINET Network Engineer Refresher Course (PN-R) – Johnson City

241

Price: $1495.00

Date: October 2, 2018

This is a hands-on, two-day refresher training class conducted by the PROFI-Interface Center (PIC). It is available only for engineers which are already certified and attended a PROFINET certification class previously. Attendees will get 12 Professional Development Hours (PDHs) for attending the class.

CLASS SYLLABUS

PROFINET Review and Refresh (new topics)

  • Technology
  • Frames
  • Configuration
    •    PLC * & PROFINET Commander *
    •    Topology and simple device replacement/commissioning *
    •    Parameters *
    •    Diagnostics *
    •    DCP *
  • Guidelines
  • Application profiles
    • PROFIsafe, PROFIenergy, PROFIdrive

Wireshark Review and Refresh (new topics)

  • Sequence of events, Startup *, Alarm *
  • Mod diff block *, watchdog *, DCP *, errors
  • TAPs + mirror ports *, tools

Features and changes

  • LLDP
  • Advanced Startup
  • FSU, Shared Device, I-device
  • High Availability and Redundancy modes (Controller, Device, Network)
  • Media Redundancy Protocols (MRP/MRPD)
  • Factory Reset, Reset to factory modes
  • Records *, I&M *
  • High Performance (IRT)
  • Technology comparisons

* denotes a section which also includes a hands-on lab

Address:
211 Mockingbird Lane
Johnson City, TN
37604
USA Map and Directions

Available Spaces: 13

PROFINET One-Day Training Class – Richmond

233

Price: $0.00

Date: October 4, 2018

8:00am    Registration and Breakfast
8:30am    Class begins
12:00pm  Hosted Lunch
4:00pm    Class ends

Updated content for 2018!

Download the Agenda

PROFINET is a standard, unmodified Ethernet protocol designed to support the latest automation strategies. One network for I/O, process instruments, motion controllers, and functional safety. It even preserves your existing investment in legacy fieldbuses by integrating them. This FREE class prepares the student to apply PROFINET in his own project. Lunch is included. Technical details of the technology are provided along with practical demonstrations.  The class is designed for:

  • End Users
  • OEMs
  • System Integrators
  • Manufacturers of automation devices

All students receive a training manual that includes a hard copy of presentations plus reference material containing the slides and network design, installation, commissioning, and security guide manuals. System Descriptions, brochures, and other documentation are also included.

Each student will receive a certificate for 5.5 Professional Development Hours (PDH).

Exhibits by device manufacturers are available during breaks.

Address:
500 East Broad Street
Richmond, VA
23219
USA Map and Directions

Available Spaces: Unlimited

PROFINET Fundamentals Course (PN-F) – Johnson City

242

Price: $2295.00

Date: October 16, 2018

The PROFINET Fundamentals class helps you get off the ground with PROFINET technology and focuses on the user’s view and basic engineering.  After attending the class you will have a good understanding of the features and use of PROFINET.  For a deeper understanding, you may want to consider our certified engineer class.  Attendees of this class will receive 12 Professional Development (PDH) credit hours.

Recommended Audience: Sales, Business developers, Distributors, Management

CLASS SYLLABUS

Ethernet Basics

  • Introduction to Ethernet, TCP, UDP, IT protocols

PROFINET Overview

  • Technology and Organization

PROFINET performance levels

  • Conformance classes

PROFINET IO

  • PLC Configuration (RT) *

PROFINET Features

  • Topology and engineering *
  • Diagnostics and engineering *
  • Identification and Maintenance

Profinet Commander *

  • IO Controller
  • Name assignment
  • Factory reset
  • Identification and Maintenance

Additional Topics

  • Simple Device Replacement
  • Fast Start Up
  • Shared Device
  • I-Device
  • Application profiles overview
    • PROFIsafe, PROFIenergy, PROFIdrive
  • Wireshark capturing with mirror port setup *
  • Technology comparisons

* denotes a section which also includes a hands-on lab

Download the Class Agenda

Address:
211 Mockingbird Lane
Johnson City, TN
37604
USA Map and Directions

Available Spaces: 16

PROFINET One-Day Training Class – Cleveland

227

Price: $0.00

Date: October 17, 2018

8:00am    Registration and Breakfast
8:30am    Class begins
12:00pm  Hosted Lunch
4:00pm    Class ends

Updated content for 2018!

Download the Agenda

PROFINET is a standard, unmodified Ethernet protocol designed to support the latest automation strategies. One network for I/O, process instruments, motion controllers, and functional safety. It even preserves your existing investment in legacy fieldbuses by integrating them. This FREE class prepares the student to apply PROFINET in his own project. Lunch is included. Technical details of the technology are provided along with practical demonstrations.  The class is designed for:

  • End Users
  • OEMs
  • System Integrators
  • Manufacturers of automation devices

All students receive a training manual that includes a hard copy of presentations plus reference material containing the slides and network design, installation, commissioning, and security guide manuals. System Descriptions, brochures, and other documentation are also included.

Each student will receive a certificate for 5.5 Professional Development Hours (PDH).

Exhibits by device manufacturers are available during breaks.

Address:
26300 Harvard Road
Warrensville Heights, OH
44122
USA Map and Directions

Available Spaces: Unlimited

PROFINET One-Day Training Class – Houston

229

Price: $0.00

Date: October 30, 2018

8:00am    Registration and Breakfast
8:30am    Class begins
12:00pm  Hosted Lunch
4:00pm    Class ends

Updated content for 2018!

Download the Agenda

PROFINET is a standard, unmodified Ethernet protocol designed to support the latest automation strategies. One network for I/O, process instruments, motion controllers, and functional safety. It even preserves your existing investment in legacy fieldbuses by integrating them. This FREE class prepares the student to apply PROFINET in his own project. Lunch is included. Technical details of the technology are provided along with practical demonstrations.  The class is designed for:

  • End Users
  • OEMs
  • System Integrators
  • Manufacturers of automation devices

All students receive a training manual that includes a hard copy of presentations plus reference material containing the slides and network design, installation, commissioning, and security guide manuals. System Descriptions, brochures, and other documentation are also included.

Each student will receive a certificate for 5.5 Professional Development Hours (PDH).

Exhibits by device manufacturers are available during breaks.

Address:
9999 Westheimer Rd
Houston, TX
77042
USA Map and Directions

Available Spaces: Unlimited

PROFINET Plugfest 2018

240

Price: $0.00

Date: November 6, 2018

PI North America members are invited to participate in a plugfest for PROFINET devices. Even though all PROFINET devices are certified in test labs, the plugfest presents the opportunity for product developers to sit with their products in a large system environment. The PROFINET Plugfest provides the opportunity to evaluate PROFINET devices and controllers in an environment that comes close to the real automation world. Companies bring their own products for collaborative testing.

Participant roles:
  • Device Manufacturer: Bring certified or close-to-certified products to test.
  • Infrastructure: Share your switches, cables, connectors, wires, or similar to help us build up our network.
  • Solution Provider: Bring your software stack, chip, SDK, module, or similar to test on the network.
  • Other: Feel free to suggest other roles!

The procedure: Products should already be certified or “nearly ready” to be certified. The products’ GSD files must be emailed to Michael.Bowne@profinet.us at least one week prior to the plugfest. Individual test stations, each with one controller, will be available. Devices will be moved from one test station to another at intervals. At the end of the second day all devices will be placed on a single network. In addition, one or more troubleshooting stations will be available if one-on-one troubleshooting is needed.

Confidentiality: Participants are not permitted to take photographs in the plugfest. Nor are they permitted to reveal anything about other companies’ products. By registering for the plugfest you are agreeing to these confidentiality rules. A group photo will be taken during the plugfest and a press release will be issued after the plugfest. If you do not want your company’s name in the press release, please tell us.

Some accommodation options:

Courtyard Scottsdale North

Hilton Garden Inn Scottsdale North/Perimeter Center

Scottsdale Marriott at McDowell Mountains

Download Agenda

Address:
16101 N 82nd St
Suite 3B
Scottsdale, AZ
85260
USA Map and Directions

Available Spaces: 24

PROFINET One-Day Training Class – Charlotte

234

Price: $0.00

Date: November 14, 2018

8:00am    Registration and Breakfast
8:30am    Class begins
12:00pm  Hosted Lunch
4:00pm    Class ends

Updated content for 2018!

Download the Agenda

PROFINET is a standard, unmodified Ethernet protocol designed to support the latest automation strategies. One network for I/O, process instruments, motion controllers, and functional safety. It even preserves your existing investment in legacy fieldbuses by integrating them. This FREE class prepares the student to apply PROFINET in his own project. Lunch is included. Technical details of the technology are provided along with practical demonstrations.  The class is designed for:

  • End Users
  • OEMs
  • System Integrators
  • Manufacturers of automation devices

All students receive a training manual that includes a hard copy of presentations plus reference material containing the slides and network design, installation, commissioning, and security guide manuals. System Descriptions, brochures, and other documentation are also included.

Each student will receive a certificate for 5.5 Professional Development Hours (PDH).

Exhibits by device manufacturers are available during breaks.

Address:
1917 Ayrsley Town Boulevard
Charlotte, NC
28273
USA Map and Directions

Available Spaces: Unlimited

PROFINET Fundamentals Course (PN-F) – Johnson City

243

Price: $2295.00

Date: November 27, 2018

The PROFINET Fundamentals class helps you get off the ground with PROFINET technology and focuses on the user’s view and basic engineering.  After attending the class you will have a good understanding of the features and use of PROFINET.  For a deeper understanding, you may want to consider our certified engineer class.  Attendees of this class will receive 12 Professional Development (PDH) credit hours.

Recommended Audience: Sales, Business developers, Distributors, Management

CLASS SYLLABUS

Ethernet Basics

  • Introduction to Ethernet, TCP, UDP, IT protocols

PROFINET Overview

  • Technology and Organization

PROFINET performance levels

  • Conformance classes

PROFINET IO

  • PLC Configuration (RT) *

PROFINET Features

  • Topology and engineering *
  • Diagnostics and engineering *
  • Identification and Maintenance

Profinet Commander *

  • IO Controller
  • Name assignment
  • Factory reset
  • Identification and Maintenance

Additional Topics

  • Simple Device Replacement
  • Fast Start Up
  • Shared Device
  • I-Device
  • Application profiles overview
    • PROFIsafe, PROFIenergy, PROFIdrive
  • Wireshark capturing with mirror port setup *
  • Technology comparisons

* denotes a section which also includes a hands-on lab

Download the Class Agenda

Address:
211 Mockingbird Lane
Johnson City, TN
37604
USA Map and Directions

Available Spaces: 16

PROFINET Certified Network Engineer and Installer Course (PN-CNE-I) – Johnson City

214

Price: $2495.00

Date: December 3, 2018

Our certification classes are intense, hands-on courses which will show you where and how to find and use technology-related information. You need to learn how the underlying technology works from the application to the frame level and pass both a practical and written exam to become certified. You will receive 24 PDH hours and two Certificates (PROFINET engineer, installer) from PROFINET International (PI) for completing the course.

CLASS SYLLABUS

Ethernet Basics

  • Introduction to Ethernet, TCP, UDP, IT protocols *

Network Installation and Infrastructure

  • Topologies *
    • SNMP *
  • Building and testing an Industrial Ethernet cable *
    • Installation guidelines and best practices
      • Laying cables
      • Grounding
      • Power system
  • Network Load calculation and rules *
  • Commissioning checklist

PROFINET Overview

  • Technology and Organization

PROFINET performance levels

  • Conformance classes

PROFINET IO

  • PLC Configuration (RT, IRT) *
  • Ethernet and protocol frames *
  • Performance calculations for IRT *
  • Diagnostics *, troubleshooting
    • Records *, alarms *, error codes *

Wireshark Capture and Analysis

  • Ethernet capture guide (port mirror, TAPs, capture tools)
  • Ethernet monitor, setup *
  • PROFNET Startup Sequence *, Alarms *, Records *, troubleshooting *

Profinet Commander

  • IO Controller *
  • Name assignment *
  • Factory reset *
  • Identification and Maintenance *
  • Data record objects *

PROFINET GSDML *

  • Device description files
  • Vendor and Device ID
  • GSD module & submodule identification
  • File structure and parameters
  • GSD Check

Additional Topics

  • Simple Device Replacement *
  • Fast Start Up
  • Shared Device
  • I-Device
  • Redundancy
  • Network Security
  • Isochronous mode application
  • Application profiles overview
    • PROFIsafe, PROFIenergy, PROFIdrive
  • Technology comparisons

* denotes a section which also includes a hands-on lab

Download the Class Agenda

Address:
211 Mockingbird Lane
Johnson City, TN
37604
USA Map and Directions

Available Spaces: 9

PROFINET One-Day Training Class – Nashville

228

Price: $0.00

Date: December 5, 2018

8:00am    Registration and Breakfast
8:30am    Class begins
12:00pm  Hosted Lunch
4:00pm    Class ends

Updated content for 2018!

Download the Agenda

PROFINET is a standard, unmodified Ethernet protocol designed to support the latest automation strategies. One network for I/O, process instruments, motion controllers, and functional safety. It even preserves your existing investment in legacy fieldbuses by integrating them. This FREE class prepares the student to apply PROFINET in his own project. Lunch is included. Technical details of the technology are provided along with practical demonstrations.  The class is designed for:

  • End Users
  • OEMs
  • System Integrators
  • Manufacturers of automation devices

All students receive a training manual that includes a hard copy of presentations plus reference material containing the slides and network design, installation, commissioning, and security guide manuals. System Descriptions, brochures, and other documentation are also included.

Each student will receive a certificate for 5.5 Professional Development Hours (PDH).

Exhibits by device manufacturers are available during breaks.

Address:
700 Cool Springs Blvd
Franklin, TN
37067
USA Map and Directions

Available Spaces: Unlimited

PROFIBUS DP/PA Certified Network Engineer and Installer Course (DPPA-CNE-I) – Johnson City

216

Price: $2495.00

Date: December 10, 2018

These classes are intensive, hands-on, four-day training programs conducted by the PROFI Interface Center (PIC). Attendees passing the tests will receive an official PROFIBUS Certified Network Engineer Certificate, as well as a PROFIBUS Certified Installer Certificate and 24 PDH hours.

The first 2.5 days cover PROFIBUS DP and the second 2.5 days cover PROFIBUS PA. See the Agenda.

CLASS SYLLABUS

PROFIBUS Overview

  • Protocol Positioning; Bus Access
  • Multi-Master Systems
  • Functionality & Protocol Structure of devices
  • DP & PA Commonality and Features

PROFIBUS DP Network Setup & Debug

  • Installation & Wiring - Copper / Alternative Media
  • Network Configuration
  • Bus Timing
  • Monitoring, Tracing, Triggering, and Filtering

DPV0 & DPV1 Enhancements

  • Telegram Formats
  • Master & Slave Interactions

PROFIBUS PA

  • Overview; Network Design
  • Profiles; FDT/DTM/DDL
  • Engineering Tools; PDM

Download the Class Agenda

Address:
211 Mockingbird Lane
Johnson City, TN
37604
USA Map and Directions

Available Spaces: 8

Share